White Stainless Steel Sublimation Tumbler – 30oz.

Description

Keep your liquids hot or cold for hours with these stylish double-walled tumblers for sublimation! These 30oz. thermal tumblers feature a glossy, white exterior, which provides for long-lasting, vibrant transfers. With sublimation, you can transfer full-color photos, logos, and other designs that your customers will adore.

Specifications:

• Stainless steel sublimation tumbler blanks
• Capacity: 30oz.
• Glossy white coating for vibrant transfers
• Dishwasher Safe
• Double-walled to keep contents hot or cold
• For use with a Mug Press or Heat Shrink Bags

Note: Be sure to remove lid before sublimating!

 

4-in-1 Mug Press

Press Temperature: 330°F
Time: 220 Seconds
Pressure: Fits snug; No closure required

• Attach sublimation transfer paper with image printed in reverse to the tumbler with thermal tape
• Place tumbler in press at the press temperature
• Press for the specified time above needed using specified pressure
• If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 – 30 seconds
• Once done, remove the tumbler from the press and remove the transfer paper immediately

 

Oven Settings

Temperature: 400°F
Time: 5 – 7 minutes
(test in your oven for accurate time)

• • Attach reversed printed image to tumbler with thermal tape
  • Place tumbler in heat shrink bag
  • Place in oven preheated to 400°F for approximately 5 – 7 minutes (test to determine best timing!)
  • Afterwards, remove heat shrink bag and paper immediately
  • Allow the tumbler to cool completely before use

 

• **For best results, and even transfer, we highly recommend pressing this tumbler in an oven.