Stainless Steel Sublimation Skinny Tumbler – 20oz.

Description

Quench your thirst for high-quality, products to personalize with these 20oz. stainless steel skinny tumblers for sublimation. These tumblers are made of a durable, lightweight stainless steel that will keep your drinks hot (or cold!) for hours on end. They feature a glossy sublimation coating for vibrant, photo-quality transfers. Personalized tumblers are perfect for corporate gifts, bachelor/bachelorette parties, promotional products, and much more.

Specifications:

• Stainless steel sublimation skinny tumblers
• Capacity: 20oz.
• Available in glossy white or silver
• Includes lid
• For use with a Mug Press, or 7″ x 11″ / 13″ x 8″ Heat Shrink Bags, in an oven.

Note: Be sure to remove lid before sublimating!

4-in-1 Mug Press (10oz, water bottle element)

Press Temperature: 325°F
Time: 150 – 165 Seconds
Pressure: Light

• Attach sublimation transfer paper with image printed in reverse to the tumbler with thermal tape
• Place tumbler in press at the press temperature, and close the element around the tumbler
• Press for the specified time above needed using specified pressure
• If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 – 30 seconds
• Once done, remove the tumbler from the press and remove the transfer paper immediately
• Allow the tumbler to cool completely before use

 

Oven Settings

Temperature: 395°F
Time: 6 – 7 Minutes
(test in your oven for accurate time)

• Attach reversed printed image to tumbler with thermal tape
• Place tumbler in heat shrink bag or silicone wrap
• Place in oven preheated to 400°F for approximately 6 – 7 minutes (test to determine best timing!)
• Afterwards, remove heat shrink bag / silicone wrap and paper immediately
• Allow the tumbler to cool completely before use