Description
Grab your Orca Sublimation Travel Mug and carry your hot or cold drinks. These sublimation travel mugs have a chrome ring around the bottom to help insulate your drink and a black lid. The black lid allows you to seal the opening or carry it by a pop-up handle, making this cup perfect for trips! No more spilling your coffee on your way to work!
Specifications:
- White with black lid with pop-up handle that also seals drinking area
- Capacity: 16oz.
- Semi-gloss tumbler with chrome ring at the bottom
- For use with Mug Press, Sublimation Wrap or Heat Shrink Bags
Note: Be sure to remove lid before sublimating!
4-in-1 Mug Press
Press Temperature: 320°F
Time: 200 Seconds
Pressure: Firm
- Attach sublimation transfer paper with image printed in reverse to the tumbler with thermal tape
- Place tumbler in press at the press temperature, and close the element around the tumbler
- Press for the specified time above needed using specified pressure
- If the image begins to look blurry, or burnt brown by over-pressing, decrease pressing time by 15 – 30 seconds
- Once done, remove the tumbler from the press and remove the transfer paper immediately
- Allow the tumbler to cool completely before use
Oven Settings
Temperature: 400°F
Time: 6 – 7 minutes
(test in your oven for accurate time)
- Attach reversed printed image to tumbler with thermal tape
- Place tumbler in heat shrink bag or sublimation wrap
- Place in oven preheated to 400°F for approximately 6 – 7 minutes (test to determine best timing!)
- Afterwards, remove heat shrink bag / wrap and paper immediately
- Allow the tumbler to cool completely before use
Reviews
There are no reviews yet.